Beefy Xt-90's lead wire connectors with spark resistor (included is a male connector with pigtails for the controller)
Please see photos for dimensional drawing
8.8 pounds in an incredibly small form factor
This is a 72v battery designed for big power. Be sure your controller can handle this much voltage. This is a very special pack for experienced DIY builders. Not only does the 72v battery give you more power it also gives you more watt hours which means more range than a comparable amp hour 48 volt battery. (read our story on calculating range)
Although 10 ah may not seem like much at first glance, this is a 72 volt battery so you are actually getting 720 watt hours of power capacity.
This pack has our 30amp continuous BMS with temperature protection built in. (read our article on BMS). While the BMS can do this output it is user's responsibility to keep the discharge at a level in line with the manufacturers discharge specs for a 3P pack, about 30A continuous, 40A peak. For high continuous current applications you need more than one of these packs in parallel.
Every ingredient in this pack is top shelf from the cells, to the BMS, to the cell holders and nickel plates holding it together, to the xt-60 and xt-90 spark resistor connectors and our own volt meter built into the pack. All this comes together to be amazing pack for the price. We are very proud of our packs and the amazing price we are offering them for.
Luna Cycles builds its packs with the finest BMS (battery management system) available so that you can plug in your battery and not worry about over charging. Your cells are automatically balanced by the internal BMS in the battery. Our BMS includes such features as temperature over heat protection and advanced cell balancing. These features not only get the maximum performance out of your BMS they also keep your battery from getting to low, charging too high, or getting too hot and will automatically shut off your pack if it senses something is wrong. (read our article on BMS)
Cell Choice - Panasonic GA
This cell is an excellent choice because its both capable of putting out good amps and power dense. This is the same cell that Tesla uses in their vehicles and Panasonic made it to be used with electric vehicles.
Make sure your controller is capable of handling 72 volts. This battery is 20S which means when at full charge it is at 84 volts. This battery is not compatible with any of our kits except for the Cyclone 3000W (if used under 30amps continuously). For a cyclone kit we recommend using 2 of these in parallel.
This battery is right at the edge of what the Cyclone 3000W controller needs. For people who purchase this battery from us and the Cyclone 3000W from us in the past, we will offer a 6 month warranty on the controller if you blow it out with this battery.
Fat triangle shape
Please note that this is 3 inch fat battery. Look at the dimensional chart for more info.