xt90 connector

xt90 Connector (male and female set)

$2.00 $1.75
You save: $0.25

Current stock: 0
  • Unbelievable low price on one of the best Ebike connectors around
  • Authentic xt90s bought in quantity from the originating factory we pass on the savings
  • Capable of handling 100amps continuous
  • 5mm gold bullet connector in nylon shroud
  • Cannot be plugged in backwards so it is very safe
  • Easy to connect even in the dark even with cold fingers
  • It is very easy to solder
  • Read our article on connectors here

 

*****

 

*****

 

Q's
 
1. How much current are these rated for?
2. Do these have spark suppression?
3. What size wire should I use with these?
4. Is the polarity marked on the connectors?
5. Which one is the Male and which one is the Female?
 
A's
 
1. They are rated for 100 amp duty ,designed to handle 100 Amps continuously without exceeding 80°C.
 
2. No, only the XT90-S has spark suppression.
 
3. XT-90 solder lugs are ideally sized to accept 10 - 12 AWG wire.
 
4. Yes, each edge of the connector has the recommended polarity symbol indicated.
 
5. The connector half with the metal prongs is the male. The half with the metal sockets is the female. The outer plastic housing does not affect gender assignment.

 

 

3 Reviews

2/5
John May 15th 2017

XT90 Connectors

These AMASS connectors look well made but the solder pins were not as pictured on the website. There is no cradle or cup to solder to only a slight bevel across the end of the pin. I can't imagine how an 8AWG wire solder joint could make a lasting connection even with the heat shrink surround. Am I missing something here?
-=-=-=-=-=-
review edited by Luna to reply: the design revision is because these are the new UL Approved version. You need to get it hotter with a soldering iron but it'll work fine.

5/5
Ron Jan 22nd 2017

simple and affordable

I'm using it for my ebike. So far they are great. I don't expect to experience any issues with them

Add a Review